How to Fix Your Ollberg Glass Door With This DIY DIY Step-By-Step Guide

Posted November 15, 2018 08:03:24A common question about Ollberges glass doors is, “What should I put in them?”There are a few different types of glass, so it can be tricky to figure out which one will fit which door.If you’re wondering how to get your door glass to slide open and close, here’s how to…

Published by admin inJuly 5, 2021
Tags: ,

Posted November 15, 2018 08:03:24A common question about Ollberges glass doors is, “What should I put in them?”

There are a few different types of glass, so it can be tricky to figure out which one will fit which door.

If you’re wondering how to get your door glass to slide open and close, here’s how to do it.1.

Measure your door opening angle.

Measure the angle from the bottom of the door to the bottom edge of the glass.

This will help you determine which door glass is best for you.2.

Place the door glass in the proper position to open.

This means placing it slightly above the top edge of your door and slightly below the top of your frame.3.

Close the door with a sturdy locking latch.

To secure the door, insert a lock on the door hinge and then place a piece of wood in the center of the lock.4.

Make sure the latch and door hinge are securely locked.5.

Attach a screwdriver or other screwdriver to the back of the locking latch and then carefully slide the locking key out.6.

Turn the lock so the backside is facing the door and the front side is facing your home.7.

Open the door slightly so that you can see the lock, then close it again.8.

Repeat steps 1 and 2 for each door.9.

Now, you’re ready to start the process of fixing your Ollberger glass doors.