Glass doors that are not designed to open automatically when a user closes the door are a common sight in the home.
But many people don’t know they’re not safe from being burglarized.
The simple way to fix this problem is to remove the glass from the door before it opens.
And that’s exactly what we’re going to show you here.
First, you’ll need a key that is at least 8 inches long, or about the size of a credit card.
That will make it easy to slide the glass over the top of the door and open it.
It will also make the lock easier to remove.
Next, get the glass doors from the hardware store and carefully take apart them.
You can use a screwdriver or a pair of pliers, but it will be easier to work with a sharp knife.
Remove the glass with the screwdriver and then use a pair or two of plies to take apart the glass.
It’s a good idea to keep the screw driver on the inside of the glass so it doesn’t move around when you’re removing it.
Next you’ll want to take off the back of the window so you can look through the opening.
You’ll need to find the two screws holding the glass back together and slide them out.
Next, remove the bottom panel of the opening and cut out a small hole in the center of the back panel to expose the screws.
Use the screwdrivers to push the back panels apart and pull them out with pliers.
You’ll also need to take out the hinge mechanism that holds the glass closed when the door is closed.
The hinges are designed to be easy to remove, but the first one can be difficult to get off.
Grab a flathead screwdriver with a flat head and push it back into the hinge, then use your pliers to push it out of the way.
The screws should come off easily and the hinge will pop free.
Next take off two of the three screws that hold the door open.
If the hinge isn’t free, you can remove it by taking it off with a small flathead or pliers and carefully sliding it out.
This will also release the hinges that hold it closed.
You should now have a small opening in the back, about 2 inches wide, that can be easily seen through the door opening.
Next you’ll remove the hinge.
Pull it out with your plies and carefully slide it back in.
You should be able to lift the hinge off with the pliers without breaking the glass itself.
If you can, take the hinge apart with the flathead you took off.
This is what you should now be left with.
The hinge is a small plastic piece that sits on the hinge and the screws that secure the door.
You’re left with a piece of glass that has been screwed into the door by the hinges, and it’s a pretty easy fix for this problem.
If you find the hinge is too small to make a large opening, then try moving the glass around.
You might have to cut the hinge with a saw or a hacksaw to make it larger.
You could also take a piece off the hinge to make room for the screws you removed earlier.
Finally, you may want to put a new hinge in place with some screws.
You need to put the new hinge over the door using two or three plies.
You will also need a small, thin screwdriver to push in the new part of the hinge so that it will pop off easily.
Once the screw is pushed out of place, you need to carefully remove the old part of your hinge.
You now have an easy, safe way to open your doors, even if you don’t like to open them.
If there are any more tips on getting your privacy door back, please let us know in the comments.